DGX 600 Dive Light: What It Is and How to Choose It for Night Dives
Learn what the DGX 600 dive light is, how to set it up, and how to pick the right beam and runtime for your dives, with practical tips from female divers.
Updated November 2026
A dgx 600 dive light is a compact, handheld underwater light that many divers use as a primary or backup source for night dives, wreck penetration and low-visibility work. This guide explains what the light is designed for, how to set it up before you enter the water, and what to check so it performs well on your dive. You will also learn how to avoid the mistakes that leave divers in the dark.
What the DGX 600 Is Designed For
Dive lights in this class are typically built for moderate-depth recreational dives, night reef dives and supplemental lighting on wreck dives. The DGX 600 sits in the handheld category, so it suits divers who want to hold the light in one hand while signaling, checking gauges or photographing marine life. Manufacturers generally specify a maximum depth rating, so confirm that number against the depths you plan to dive before you buy or rent one.
Shopping for one? See our guide: 5 Best Scuba Dive Light Picks: Top Options Compared (2026).
Setting Up Your DGX 600 Before the Dive
Preparation makes the difference between a light that works all dive and one that fails at the worst moment. Work through these steps the night before and again on the boat or shore:
- Charge the battery fully and confirm the indicator shows a complete charge.
- Inspect the O-ring and seal surfaces for hair, grit or nicks, and lightly re-grease the O-ring with silicone lubricant if it looks dry.
- Check that the lens is clean and free of salt residue.
- Turn the light on at the surface and cycle through the modes so you know which setting is which by feel.
- Pack a backup light or a small secondary light in your kit.
Choosing the Right Beam and Mode for Your Dive
The beam you run matters as much as the brightness number on the body. A narrow, focused beam reaches farther and suits open water or scanning ahead, while a wider beam gives better close-range visibility and is easier on your buddy’s eyes. Many divers switch between modes depending on the dive: a high setting for navigation and a lower setting for conserving battery and reducing backscatter from particles in the water. Try each mode on the surface at night to see how the beam spreads before you rely on it underwater.
Managing Battery Life and Runtime
Battery life drops as you move to higher output settings, and it shortens further in cold water. Plan your dive around the runtime at the mode you actually use, not the maximum output. Keep a simple rule: if your dive plan calls for an hour of light, carry a backup that covers the full dive time with a margin. Note how long the light lasts on your first few dives so you build a realistic baseline for your own habits.
Post-Dive Care
Rinse the light in fresh water after every dive and dry the exterior before storing it. Remove the battery if you will not use the light for several weeks, and store it somewhere cool and dry. Check the O-ring each time you open the housing.
Common Mistakes to Avoid
- Skipping the O-ring check and assuming the seal is fine after a previous dive.
- Running the brightest mode throughout the dive, which drains the battery early.
- Relying on a single light for a dive that needs redundancy.
- Storing the light with a partly charged battery for long periods.
- Never testing the light at night on the surface before the dive.
If you are new to dive lights in general, the articles on choosing between wide and narrow beams and wrist-mounted lights explain how beam and mounting choices affect your setup. For a broader comparison of the options, see Top 7 Best Technical Dive Light Picks Compared for Serious Divers.
Recommended Gear
- Silicone O-ring lubricant: keeps the housing seals supple so water stays out between dives. View on Amazon
- Spare dive light batteries: a charged spare lets you swap mid-dive or on a long surface interval without waiting to recharge. View on Amazon
- Dive light lanyard or wrist mount: keeps the light secured in your hand and frees both hands for other tasks. View on Amazon
FAQ
Is the DGX 600 suitable as a primary dive light?
It can serve as a primary light on recreational night dives if the beam and runtime match your dive plan. Many divers still carry a backup light for redundancy on any dive where light is essential.
How do I know when the battery is running low?
Watch for dimming output or a change in the indicator behavior, and check the manufacturer’s guidance for your specific model. If you notice dimming during a dive, switch to your backup light and end the dive when your plan calls for it.
Can I use the DGX 600 for underwater photography?
You can use it as a supplemental light for close-up work, especially with a wider beam setting that reduces hot spots. Test the light with your camera setup on land or in a pool first, since the beam and reflections vary with lens and housing choices. Consult an experienced underwater photographer if you are unsure how to balance your light with your camera.
Conclusion
A dgx 600 dive light works best when you match its beam and mode to the dive, keep the seals clean and charge it fully before every trip. Run a short pre-dive check each time and carry a backup light for any dive where you depend on light. With those habits in place, you will spend less time worrying about your light and more time watching what is around you.
Related reading
- Xtar Dive Light SD2: Specs, Setup and Buying Tips for Divers
- Wrist Mounted Dive Light: 7 Tips for Choosing and Using One Safely
- Wide or Narrow Beam Dive Light: Which Should You Choose?
- What Is a Water Activated Dive Marker Light and How Does It Work?
- What Is a Sea Life Dive Light and Do You Need One?
Ready to choose one?
