We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Feit Electric Dive Light: Setup, Beam Choice and Safe Use for Divers

Learn how to choose and use a Feit Electric dive light, including beam choice, battery care and safety checks before you descend.

Updated November 2026

A feit electric dive light is a budget-friendly option that can work well for recreational divers who want a backup or a basic night dive light. In this guide, you will learn how to check whether a Feit Electric light suits your diving, how to set it up, and how to use it safely underwater. The advice applies to any light you plan to rely on below the surface, so treat the checks as a routine rather than a one-time task.

Decide Whether a Feit Electric Light Fits Your Diving

Start by matching the light to the dives you actually do. A feit electric dive light is generally better suited to shallow recreational dives, night boat dives in clear water, and backup duty than to technical or cave diving. Manufacturers of consumer lights typically specify a maximum depth and a runtime at a given brightness, so compare those figures against your planned dive profile before you buy or rely on one.

Shopping for one? See our guide: 5 Best Scuba Dive Light Picks: Top Options Compared (2026).

Also consider how you will carry it. Handheld lights need a secure lanyard, while a wrist-mounted or clip-on setup keeps your hands free for the reel, camera or gauge.

Choose the Right Beam for Your Dives

Beam width changes what you see. A wide beam lights up a large area and helps with buddy checks and general navigation, while a narrow beam reaches further and suits spotting marine life at distance. Many divers carry both types. If you are unsure which suits you, our guide on Wide or Narrow Beam Dive Light: Which Should You Choose? explains the trade-offs in more detail.

Set Up and Charge the Light Correctly

Preparation prevents most in-water problems. Follow these steps before every dive day:

  1. Read the manufacturer’s manual for the exact charging method, runtime figures and depth rating.
  2. Charge the battery fully using the supplied charger, and avoid leaving it on the charger for longer than the instructions allow.
  3. Inspect the O-ring and seal surfaces for hair, grit, nicks or old lubricant. Clean and re-lubricate with a silicone-based grease if the manufacturer recommends it.
  4. Close the housing firmly and check that the switch works in both modes before you enter the water.
  5. Run the light at the brightness you plan to use for about ten minutes on the surface to confirm the battery holds up.

For general charging habits that apply across brands, see Sola Dive Light Charging: A Step-by-Step Guide for Divers.

Use the Light Safely Underwater

Plan your light use around your gas and time. Carry a backup light, even a small one, so a single failure does not end your dive. Switch the light on before you need it, not when the water gets dark, and avoid pointing it directly into a buddy’s mask, which causes glare and disorientation.

Keep the light secured with a lanyard or mount at all times. A dropped light can sink, tangle in the reef or be lost entirely. If you are considering a wrist-mounted setup, our article on Wrist Mounted Dive Light: 7 Tips for Choosing and Using One Safely covers mounting and retention options.

Common Mistakes to Avoid

  • Skipping the O-ring inspection, which is the most common cause of flooding.
  • Assuming the rated runtime applies at maximum brightness. Brighter modes drain the battery much faster.
  • Storing the light with a partly charged or fully drained battery for long periods.
  • Relying on a single light for night diving with no backup.
  • Rinsing the light in fresh water without drying the housing and checking seals afterward.

A spare O-ring kit makes it easier to keep seals in good shape between dives. View on Amazon

A small backup light gives you a second source of illumination for night dives and emergencies. View on Amazon

A lanyard or wrist strap keeps the light attached to you if your hands are busy. View on Amazon

FAQ

Is a feit electric dive light suitable for technical diving?

Most budget consumer lights are designed for recreational depths and are not typically rated for technical or cave use. Check the manufacturer’s depth rating and runtime before you use one on any dive that requires redundant lighting. Consult a qualified instructor if you are unsure.

How often should I check the O-ring on my dive light?

Inspect the O-ring before every dive day and clean it after each trip. Replace it if you see nicks, flattening or cracks, and follow the manufacturer’s guidance on lubrication.

Should I carry a backup light with a feit electric dive light?

Yes, especially for night dives or any dive where you depend on light to navigate. A second light gives you a safe option if the primary light fails.

Conclusion

A feit electric dive light can serve well for recreational diving when you match it to your dive profile and maintain it carefully. Set it up correctly, choose a beam that suits your diving, and always carry a backup. Consult a dive professional if you plan deeper or more demanding dives.

Miles Sinclair

About Miles Sinclair

Miles Sinclair is part of our editorial team and reviews and edits our scuba gear for women guides, checking product details against manufacturer specifications and owner feedback.

About the author

Miles Sinclair
Miles Sinclair

Miles Sinclair writes reviews and buying guides for Scuba Women.