We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Clear Scuba Regulator Water: A Step-by-Step Guide for Divers

Learn how to clear scuba regulator water with the purge button and the exhale method. Clear steps, common mistakes, and tips for calm, safe breathing underwater

Updated November 2026

To clear a scuba regulator, you use a short, controlled burst of air to push water out of the second stage, the mouthpiece you breathe from. Most divers do this with the purge button or by exhaling firmly into the mouthpiece. Once you know the steps, you can clear water in seconds and keep breathing normally.

Why Water Gets Into a Regulator

Water can enter the second stage when you take the mouthpiece out of your mouth, when you breathe in while your head is tilted, or when the regulator is dropped and bumped. Some water is normal in certain positions, especially on a hose that runs low. The goal is not to avoid every drop but to clear it quickly and calmly so it does not interfere with your breathing.

Shopping for one? See our guide: 4 Best Scuba Diving Regulator Packages of 2026.

How to Clear a Scuba Regulator Step by Step

Method 1: Use the Purge Button

  1. Keep the mouthpiece in your mouth and breathe normally.
  2. Press the purge button on the second stage gently, then release it. A short press is usually enough.
  3. Watch the water flow out at the lower edge of the mouthpiece. Repeat if needed.

Method 2: Use the Exhale Method

  1. Tilt your head slightly back so the mouthpiece is at the highest point of your mouth.
  2. Take a normal breath in, then exhale steadily through the regulator. Do not blow hard, because a gentle, steady stream works better.
  3. Close your lips around the mouthpiece and take a breath. If water remains, repeat the exhale.

Choosing the Right Method for Your Dive

The purge button works well in most conditions and is the method most instructors teach first. The exhale method is useful if the purge button is stiff, jammed with sand, or if you prefer not to release air rapidly. Practice both in a pool or shallow water so you know which one suits you under stress.

Method Best for Key tip
Purge button Most situations, quick clearing Short, gentle press
Exhale method Stiff purge or backup Steady, not forceful, exhale

Common Mistakes to Avoid

  • Pressing the purge button too hard, which can cause a rush of air and make the mouthpiece feel unstable.
  • Panicking and breathing rapidly when water enters. Slow, normal breaths keep you calm.
  • Removing the regulator from your mouth to clear it when you can clear it in place.
  • Ignoring a regulator that keeps flooding. Have it checked by a qualified technician.
  • Failing to practice. Clearing water is a skill that improves with repetition.

A dive regulator bag protects your second stage from bumps and debris, which helps reduce the chance of leaks and stuck purge buttons. Keep it stored clean and dry between dives. View on Amazon

A rinse bucket or freshwater tub makes it easier to flush salt and sand out of the second stage after each dive, keeping the purge valve working smoothly. View on Amazon

For more on keeping your gear ready, see Dive Rite Regulator Bag: How to Choose and Pack One (2026) and Dive Gear Bag Nz: How to Choose the Right Bag for Scuba Gear in New Zealand.

FAQ

Can water in a regulator be dangerous?

A small amount of water is usually a nuisance rather than a serious hazard. Coughing or panic is the bigger risk, so stay calm, breathe slowly, and clear the regulator before continuing. Consult a certified instructor if you are unsure.

How often should I clear my regulator during a dive?

You only need to clear it when water enters. Some divers check periodically as a habit, which helps them notice leaks early. Consult your instructor for guidance on your specific equipment.

What if the purge button sticks?

Try the exhale method first. Then rinse the second stage in fresh water after the dive and have a qualified technician inspect it before your next trip.

Conclusion

Clearing a scuba regulator comes down to a gentle purge or steady exhale, and both are easy to learn with practice. Stay calm, breathe normally, and clear the water as soon as it appears. Practice these skills in shallow water until they feel automatic.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our scuba gear for women guides, checking product details against manufacturer specifications and owner feedback.

About the author

Lauren Holland
Lauren Holland

Lauren Holland writes reviews and buying guides for Scuba Women.