We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Dive Rite CX3 Handheld Light: Setup, Use and Buying Tips for Divers

Learn how the Dive Rite CX3 handheld light works, how to set it up and use it on dives, and what to check before buying one for night or cave diving.

Updated November 2026

The Dive Rite CX3 handheld light is a compact primary or backup torch designed for divers who want a dependable light they can hold, stow and use with one hand. This guide explains what the CX3 is best suited for, how to prepare it before a dive, and how to use it so you can judge whether it fits your diving. The short version: it works best as a secondary or utility light, and it rewards divers who check it every time before getting in the water.

Decide Whether the CX3 Fits Your Diving

Before you buy or rely on any handheld light, match it to the dives you actually do. A light that works for a shallow reef night dive may not be adequate for a long overhead environment. Think about three questions: how deep you dive, how far you need to see, and whether the light will be your main source or a backup.

Shopping for one? See our guide: 6 Best Dive Rite Backup Lights for Safe Night and Technical Dives. We also found 6 Best Dive Lights with Laser Options for Night and Reef Diving useful on this point.

  • Recreational night dives: A handheld light in this class is usually enough for seeing your buddy, reading a dive slate and checking your gauges.
  • Wreck or overhead dives: Plan for a primary light and a separate backup of comparable or greater output, following your training agency’s guidance.
  • Cave or technical diving: Treat any handheld light as one component of a redundant lighting plan, not the sole source.

If you are comparing options within the same brand family, the guide to Dive Rite Canister Light: How to Choose and Use One (Step-by-Step) covers how canister designs differ from handheld units, which can help you decide which format suits your dives.

Prepare the Light Before Every Dive

Most handheld light problems are preventable. Run through the same checks each time so nothing gets skipped when you are rushed or tired.

  1. Confirm the battery or power source is fully charged, and carry a spare if your dive plan allows.
  2. Inspect the O-ring and seal surfaces for nicks, hair, sand or old lubricant. Clean and re-lubricate with a silicone-based grease the manufacturer recommends.
  3. Check the lens for scratches or cracks that could reduce output or let water in.
  4. Activate the light on the surface in a dry, shaded spot to confirm the beam and each mode work.
  5. Test the lanyard or wrist attachment so the light stays with you if you lose your grip.
  6. Rinse the light in fresh water after the dive and dry it before storage. Remove the battery if you will not use the light for a long time.

Manufacturers specify the exact lubrication and battery handling steps for their models, so follow the printed instructions that came with your unit.

Use the CX3 Effectively Underwater

A handheld light is only useful if you can operate it without fumbling. Practice switching modes and changing hands before you need to, ideally in a pool or shallow water.

Hold and Aim the Beam

Hold the light slightly away from your body and angle the beam down and forward rather than straight into your mask. Backscatter from particles in the water is worse when the light is close to your face. Keep the beam steady when signaling your buddy, and avoid sweeping it across other divers’ faces.

Switch Modes Without Losing Control

Use the mode button with the same hand that holds the light, and keep your thumb near the switch. If you are dealing with a current or handling a camera, choose one mode and stay with it rather than cycling through all of them.

Common Mistakes to Avoid

  • Skipping the O-ring check because the light worked on the last dive.
  • Pointing the beam straight ahead, which lights up particles and reduces visibility.
  • Relying on one light for an overhead or night dive with no backup.
  • Storing the light with the battery installed in a hot car or in direct sun.
  • Assuming a rinsed light is dry inside the housing before you close it up.

Pairing the light with the right accessories makes it easier to use and to keep safe.

  • A dive light lanyard or wrist strap: Keeps the light attached if your hand slips or you need both hands for a task. View on Amazon
  • Silicone O-ring grease: Helps maintain a watertight seal when used sparingly on clean O-rings. View on Amazon
  • A spare backup dive light: Gives you a second source of light for night or overhead dives. View on Amazon

FAQ

Is the Dive Rite CX3 handheld light suitable as a primary light?

It can serve as a primary light for many recreational night dives, but overhead and technical environments call for a dedicated primary plus a backup. Check your training agency’s lighting guidance for your dive type.

How often should I service the O-rings?

Inspect them before every dive and clean and re-lubricate them according to the manufacturer’s schedule. Replace any that show cuts, flattening or cracks.

Can I use the light in freshwater and saltwater?

Yes, but rinse it in fresh water after saltwater dives to prevent corrosion and seal wear. Always confirm the depth and water-type ratings in the manufacturer’s documentation.

Conclusion

The Dive Rite CX3 handheld light is most valuable when you match it to the right dive type, inspect it before every dive, and practice handling it on the surface. Treat it as part of a redundant lighting plan, especially for night, overhead or technical diving. If you have doubts about your lighting setup for a specific environment, consult a certified instructor or dive professional.

Miles Sinclair

About Miles Sinclair

Miles Sinclair is part of our editorial team and reviews and edits our scuba gear for women guides, checking product details against manufacturer specifications and owner feedback.

About the author

Miles Sinclair
Miles Sinclair

Miles Sinclair writes reviews and buying guides for Scuba Women.