We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Ikelite Gamma II Waterproof Dive Light: Setup, Power and Buying Tips

Learn how to set up, power and use an Ikelite Gamma II waterproof dive light, plus what to check before you buy one for night and cave dives.

Updated November 2026

The Ikelite Gamma II waterproof dive light is a compact primary or backup light built for divers who want reliable output and a simple setup. This guide explains what to check before you buy an ikelite gamma ii waterproof dive light, how to prepare it for a dive, and how to avoid the mistakes that cause flooded housings or dead batteries mid-dive.

Check the Light Against Your Diving Needs

Start with where and when you dive. Night dives, wrecks and overhead environments call for a primary light with enough output to show detail at distance, while daytime reef dives often need only a backup or a light for close inspection. Think about your typical dive depth too, because the water column absorbs red and orange wavelengths quickly, and a stronger white beam helps you see true colors below about 10 meters.

Shopping for one? See our guide: 5 Best Scuba Dive Light Picks: Top Options Compared (2026).

Consider beam shape before you commit. A narrow beam reaches farther and suits open water, while a wider beam lights up more of the area around you and works better for close-range work. If you are unsure, review Wide or Narrow Beam Dive Light: Which Should You Choose? to match the beam to your dives.

Prepare the Light Before Every Dive

Preparation takes only a few minutes, and skipping it is the most common reason lights fail underwater. Work through this list before you pack the light:

  1. Inspect the O-ring for nicks, hair, sand or grease, and clean it with a lint-free cloth.
  2. Apply a thin, even layer of silicone grease to the O-ring only. Excess grease can attract grit.
  3. Confirm the battery is charged and seated correctly, with the contacts clean and dry.
  4. Seal the housing and switch the light on briefly at the surface to confirm output and beam.
  5. Rinse the light in fresh water after every saltwater dive, and let it dry with the cap off.

If you carry a primary and a backup, use a different battery charge cycle for each so both do not fail on the same night.

Mount and Use the Light Safely

Choose a mounting method that keeps your hands free and the beam where you are looking. A wrist or lanyard setup works for most divers, but it can snag on line or reef, so keep the cord short and tucked. For guidance on mounting options, see Wrist Mounted Dive Light: 7 Tips for Choosing and Using One Safely.

During the dive, use the light sparingly to conserve battery. On night dives, keep it pointed slightly ahead and downward to avoid blinding your buddy. Turn it off when you are not actively using it, and check the power level at the surface before every dive.

Maintain the Light and Replace Parts on Schedule

Maintenance is what keeps a dive light reliable across seasons. Rinse after each dive, store the light in a cool, dry place, and replace the O-ring at the interval the manufacturer specifies or sooner if it shows wear. Keep the battery charged to its recommended level during storage and avoid leaving it fully discharged for long periods. Lithium-based batteries require particular care, so follow the manufacturer’s charging instructions and never charge a damaged cell. If you notice swelling, heat or a burning smell, stop using the battery and consult the manufacturer or a qualified professional.

Common Mistakes

  • Skipping the O-ring inspection before a dive, which is the top cause of flooding.
  • Using too much grease, which traps grit on the seal surface.
  • Leaving the light switched on in a bag, draining the battery before the dive.
  • Storing the light fully discharged for months, which shortens battery life.
  • Relying on a single light for night diving with no backup.
  • Silicone grease for dive light O-rings: A light coat keeps the seal supple and reduces friction during closing. View on Amazon
  • Lanyard or wrist strap for dive lights: Keeps the light secured so you can use both hands. View on Amazon
  • Spare O-ring kit for dive lights: Lets you replace a worn seal before it causes a leak on a trip. View on Amazon

FAQ

Is the Ikelite Gamma II suitable for night diving?

It can serve as a primary or backup light for night dives, depending on your dive plan and the output you need. Always carry a backup light for any night dive, regardless of your primary.

How often should I replace the O-ring?

Follow the manufacturer’s replacement interval and inspect the O-ring before every dive. Replace it immediately if you see cracks, flattening or cuts.

Can I store the light with the battery installed?

Storing with the battery installed is generally fine if the light is off and the battery is charged to the level the manufacturer recommends. Check the manual for specific storage guidance, and consult a professional if you are unsure.

Conclusion

A well-chosen and well-maintained dive light makes night and low-visibility diving safer and more enjoyable. Match the light to your dive plan, prepare it carefully before every dive, and keep a backup ready. Following these steps will help your ikelite gamma ii waterproof dive light perform reliably on every trip.

Miles Sinclair

About Miles Sinclair

Miles Sinclair is part of our editorial team and reviews and edits our scuba gear for women guides, checking product details against manufacturer specifications and owner feedback.

About the author

Miles Sinclair
Miles Sinclair

Miles Sinclair writes reviews and buying guides for Scuba Women.