We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Mares Smart Dive Computer Light: What It Does and How to Use It Safely

Learn what a mares smart dive computer light does, how the light and computer work together, and how to set and use it safely on your next dive.

Updated November 2026

A mares smart dive computer light is not a single standard product, so the first step is knowing what the term covers. Most divers use it to describe a dive computer that works with a light, either as a built-in function, a connected accessory or a pairing with a companion light. This guide explains how to identify what you have, set it up and use it without distracting from your dive plan.

Step 1: Identify What Your Setup Includes

Before you change any settings, confirm what your unit does. Check the model name printed on the case and the manual that came with it. Some Mares computers are wrist-worn units with an on-screen backlight, which is not the same as a dedicated dive light. A separate underwater light, such as a handheld or wrist-mounted lamp, is a different device that you pair with or simply carry alongside the computer.

Shopping for one? See our guide: Best Smart Watch Dive Computer (2026): Which Should You Choose?.

Write down three things: the computer model, the light model (if any) and whether the two connect electronically. If they do not connect, treat them as two independent tools.

Step 2: Set Up the Computer and Backlight

Most dive computers have an illumination setting that controls how long the backlight stays on after you press a button. Set it to the shortest interval that still lets you read the display at depth. A long backlight drains the battery faster and can be distracting in low light.

  1. Enter the menu and locate the display or illumination settings.
  2. Choose automatic activation if available, so the backlight turns on when you press a button or raise your wrist.
  3. Test the display in a dark room and in bright light before your first dive.
  4. Confirm the time-out length and note it in your dive plan.

Step 3: Pair or Position the Light Correctly

If your light and computer are separate, position the light where it helps you read gauges and check your buddy without blocking the computer screen. A wrist-mounted light placed on the opposite wrist from your computer keeps both in view. A handheld light works best when you can switch it on and off without releasing your regulator.

Brightness matters more than most divers expect. Use the lowest output that lets you see clearly, because a bright beam reflects off particles and reduces visibility. Check that the light is fully charged or has fresh batteries before every dive, and carry a backup light for any dive deeper than a few meters into dark water.

Step 4: Practice Reading Your Data in Low Light

Practice reading your depth, time and no-decompression limit in the dark before you rely on the setup in open water. Do this in a pool or a shallow, dark area with your buddy. Note how long the display stays readable after you press the button and whether glare from the light interferes with the screen.

Check What to look for
Backlight time-out Long enough to read at depth, short enough to save battery
Light beam angle Does not wash out the computer screen
Battery level Full before the dive, with a reserve for the surface interval
Button access Can be reached with gloves on

Common Mistakes

  • Assuming a dive computer is a dive light. Confirm what your device actually does.
  • Leaving the backlight on continuously, which drains the battery during the dive.
  • Using the brightest light setting in murky water, which causes backscatter.
  • Skipping a pre-dive test of the display and light.
  • Mounting the light so it blocks the computer screen or your gauges.
  • Wrist-mounted dive light: Keeps both hands free and lets you check your computer without stowing a handheld lamp. View on Amazon
  • Spare dive light battery or backup light: A second light covers you if the primary fails on a night or deep dive. View on Amazon

FAQ

Is a mares smart dive computer light the same as a dive light?

Not necessarily. Some Mares dive computers have a backlight for reading the display, while a dive light is a separate device for illuminating your surroundings. Check your model’s manual to see which features it includes.

How bright should my dive light be?

Use the lowest brightness that lets you see clearly, especially in clear water. Very bright beams reflect off suspended particles and reduce visibility.

Should I check my computer before every dive?

Yes. Confirm battery level, backlight settings and that the display reads clearly in low light. For questions about dive planning or decompression, consult a certified dive professional.

Conclusion

A mares smart dive computer light setup works best when you know exactly what your devices do and have tested them before the dive. Identify your model, set a sensible backlight time-out and position any separate light so it helps rather than distracts. Practice reading your data in the dark, and carry a backup light for any dive where visibility or depth makes a failure risky.

Miles Sinclair

About Miles Sinclair

Miles Sinclair is part of our editorial team and reviews and edits our scuba gear for women guides, checking product details against manufacturer specifications and owner feedback.

About the author

Miles Sinclair
Miles Sinclair

Miles Sinclair writes reviews and buying guides for Scuba Women.