We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Scuba Diving Gear Set: 6 Parts You Need and How to Choose Them

Learn what a scuba diving gear set includes, how to size each piece for a woman's body, and which items to buy first. A clear guide for new and returning divers

Updated November 2026

A scuba diving gear set is the core kit you need to breathe underwater and stay comfortable on every dive: a regulator, BCD, wetsuit, mask, fins and a dive computer. This guide walks you through each piece, explains how women’s sizing differs from unisex sizing, and gives you a practical order for buying. By the end, you will know what to purchase first and what to check before you commit.

Know What Belongs in a Scuba Diving Gear Set

Most complete sets fall into two groups. Life support gear includes the regulator, the buoyancy control device (BCD) and the tank, which your dive shop usually supplies on rental. Personal gear includes the items that must fit your body well: the mask, fins, wetsuit or drysuit, booties and gloves. Your first purchases should focus on personal gear, because a poor fit causes more problems than a slightly older regulator.

Shopping for one? See our guide: 8 Best Dive Bomb Shell Bags for Scuba Gear Transport (2026).

Size Each Piece for a Woman’s Body

Women’s wetsuits and BCDs are cut for different proportions than men’s, usually with a shorter torso, narrower shoulders and a fuller hip. Check the manufacturer’s size chart against your chest, waist, hip and height measurements rather than relying on your usual clothing size.

  • Wetsuit: Measure bust, waist and hip with a soft tape. The suit should feel snug without restricting breathing, and the crotch seam should sit where it does not pinch when you bend.
  • BCD: The chest strap should sit just below the bust, and the shoulder straps should not dig in when the cell is inflated.
  • Mask: Press the mask to your face without the strap. It should hold its seal by suction alone and rest without gaps at the cheeks and nose.
  • Fins: Choose a fit that is snug at the heel. Full-foot fins should feel firm but not cramped, and open-heel fins need booties one size up to allow for thickness.

Buy in the Right Order

Spend first on the mask and fins, since you use them on every dive and they are easy to test in a store. Next, choose exposure protection based on your local water temperature. Add a BCD and regulator once you have logged enough dives to know your preferences, or rent them until then.

  1. Mask, with a try-on test for a leak-free seal.
  2. Fins and booties, sized for your foot type.
  3. Wetsuit or drysuit, matched to the water temperatures you dive in.
  4. Dive computer, which tracks depth, time and no-decompression limits.
  5. BCD and regulator, after you have experience and a clear fit preference.

Check Your Set Before Every Dive

Inspect straps, buckles, inflator hoses and mask skirts for cracks or wear before each trip. A quick pre-dive check catches problems that are far easier to fix on the surface. If you have any health concerns about diving, consult a physician or a dive medicine professional before you buy or dive.

Common Mistakes

  • Buying a unisex wetsuit or BCD without comparing the women’s size chart.
  • Choosing a mask that fits a friend’s face rather than your own.
  • Selecting a wetsuit thickness only for the air temperature, not the water.
  • Buying fins before you have tried them on with the booties you will wear.
  • Skipping a rinse and dry routine, which shortens the life of neoprene and seals.

A well-fitting mask is the single most useful purchase for a new diver. Look for one with a soft silicone skirt and a low internal volume. View on Amazon

Full-foot fins in a size that matches your shoe size give you control with less leg strain. View on Amazon

A dive computer displays depth, bottom time and ascent rate in one place. View on Amazon

FAQ

Should I buy a complete scuba diving gear set at once?

Most divers do not. Buying the mask, fins and exposure suit first lets you test fit and comfort, and you can rent the regulator and BCD until you know what suits you.

How do I know if a wetsuit fits correctly?

It should feel snug all over, with no gaps at the wrists, ankles or neck, and you should be able to bend and breathe without restriction. Check the fit in the water when possible.

How often should I replace my dive gear?

Replacement depends on use, storage and care. Inspect gear regularly, and follow the manufacturer’s service intervals for regulators and dive computers. Check with a certified technician if you notice wear.

Conclusion

A scuba diving gear set works best when each piece fits your body and your diving style. Start with the mask, fins and exposure protection, then add life support gear as your experience grows. Check the manufacturer’s women’s sizing charts before you buy, and keep your kit inspected and rinsed after every dive.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our scuba gear for women guides, checking product details against manufacturer specifications and owner feedback.

About the author

Ethan Brooks
Ethan Brooks

Ethan Brooks writes reviews and buying guides for Scuba Women.