We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Light Motion Sola Dive 500: Setup, Beam Use and Buying Tips

Learn how to set up, use and choose the light motion sola dive 500 for night and low-visibility dives, with beam tips and buying advice for women divers.

Updated November 2026

The light motion sola dive 500 is a compact, rechargeable primary or backup light built for recreational night dives and low-visibility conditions. This guide explains how to set it up, how to choose the right beam for your dive, and what to check before you buy. By the end, you will know how to get reliable output from the light and how to avoid the mistakes that cause dim beams or unexpected shutdowns.

Setting Up the Light Motion Sola Dive 500 Before Your First Dive

Start with a full charge and a fresh O-ring check. Most light and motion sola dive 500 issues on the surface trace back to a poorly seated seal rather than the electronics. Follow these steps before every dive day:

Shopping for one? See our guide: 4 Best Light and Motion Dive Torch Options for Night Diving.

  1. Charge the light fully using the supplied charger and wait until the indicator confirms completion.
  2. Remove the battery cap and inspect the O-ring for nicks, hair, sand or old grease.
  3. Clean the O-ring and sealing surface with a lint-free cloth, then apply a thin layer of silicone lubricant.
  4. Seat the O-ring evenly by rolling it into the groove with your fingers before closing the cap.
  5. Close the cap until it stops, then give it a quarter turn back to confirm it is not cross-threaded.
  6. Test the light on the surface in a dark room and confirm the beam mode you plan to use.

Choosing the Right Beam Mode for Your Dive

The sola series offers several output levels, and selecting the right one matters more than running the brightest setting all the time. Higher output drains the battery faster and can create glare on silty bottoms or in particulate-heavy water. Lower settings preserve runtime and give you better color rendering for close-up work.

Matching Output to Dive Type

For navigation and general night wandering, a medium setting usually gives the best balance of visibility and runtime. For macro photography or inspecting small marine life, drop to the lowest useful level so you do not wash out the subject or spook shy animals. Keep the brightest setting for emergencies or for scanning open water.

Accounting for Water Clarity

In clear water, a focused beam reaches farther. In murky water, a wider spread reduces backscatter from particles directly in front of you. If you dive in both conditions, decide your default mode before you enter the water so you are not fiddling with the switch at depth.

Maintaining the Light Between Dives

Rinse the light in fresh water after every dive and let it dry with the cap open. Store it with the battery partly charged rather than fully drained or sitting at full charge for weeks. If you notice flickering, a dim beam after charging, or water inside the housing, stop using the light and have it inspected before the next dive. Owners often report that most trouble comes from salt residue around the switch and cap threads.

Common Mistakes With the Light Motion Sola Dive 500

  • Skipping the O-ring inspection because the light seemed fine on the last dive.
  • Running the brightest mode continuously, which shortens runtime and creates glare.
  • Storing the light in a hot car or direct sun, which can degrade the battery over time.
  • Tightening the cap with force, which can damage the threads and seal.
  • Carrying only one light on night dives instead of a backup.
  • Silicone O-ring lubricant: A light coat keeps the seal supple and makes it easier to check for damage before each dive. View on Amazon
  • Lint-free microfiber cloth: Useful for drying and inspecting the sealing surface without leaving fibers behind. View on Amazon
  • Dive light lanyard or wrist strap: Keeps the light secured to your hand or gear so you do not lose it during a current or a tangle. View on Amazon

FAQ

Can I use the light motion sola dive 500 as a backup light?

Yes, and many divers do. Keep it on a separate mount from your primary light and check its charge before each night dive so it is ready if your main light fails.

How often should I replace the O-ring?

Replace it whenever you see cuts, flattening, cracking or persistent hair or debris marks that cleaning does not remove. Manufacturers generally recommend inspecting it before every dive and replacing it on a schedule set by how often you dive.

Is the light suitable for macro photography?

It can be, especially at lower output levels that reduce glare on small subjects. For demanding macro work, a diffuser or a dedicated video light may give more even illumination, and a qualified instructor can help you choose.

Conclusion

The light motion sola dive 500 performs well when you inspect the O-ring, choose the beam mode that fits the dive, and rinse and store it correctly. Build these habits into your routine and the light will be dependable on every night dive. If you have a health or safety concern about night diving, consult a qualified dive professional before you go.

Miles Sinclair

About Miles Sinclair

Miles Sinclair is part of our editorial team and reviews and edits our scuba gear for women guides, checking product details against manufacturer specifications and owner feedback.

About the author

Miles Sinclair
Miles Sinclair

Miles Sinclair writes reviews and buying guides for Scuba Women.